opensslconf.h 7.2 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273
  1. /* opensslconf.h */
  2. /* WARNING: Generated automatically from opensslconf.h.in by Configure. */
  3. #ifdef __cplusplus
  4. extern "C" {
  5. #endif
  6. /* OpenSSL was configured with the following options: */
  7. #ifndef OPENSSL_SYSNAME_MACOSX
  8. # define OPENSSL_SYSNAME_MACOSX
  9. #endif
  10. #ifndef OPENSSL_DOING_MAKEDEPEND
  11. #ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
  12. # define OPENSSL_NO_EC_NISTP_64_GCC_128
  13. #endif
  14. #ifndef OPENSSL_NO_GMP
  15. # define OPENSSL_NO_GMP
  16. #endif
  17. #ifndef OPENSSL_NO_JPAKE
  18. # define OPENSSL_NO_JPAKE
  19. #endif
  20. #ifndef OPENSSL_NO_KRB5
  21. # define OPENSSL_NO_KRB5
  22. #endif
  23. #ifndef OPENSSL_NO_LIBUNBOUND
  24. # define OPENSSL_NO_LIBUNBOUND
  25. #endif
  26. #ifndef OPENSSL_NO_MD2
  27. # define OPENSSL_NO_MD2
  28. #endif
  29. #ifndef OPENSSL_NO_RC5
  30. # define OPENSSL_NO_RC5
  31. #endif
  32. #ifndef OPENSSL_NO_RFC3779
  33. # define OPENSSL_NO_RFC3779
  34. #endif
  35. #ifndef OPENSSL_NO_SCTP
  36. # define OPENSSL_NO_SCTP
  37. #endif
  38. #ifndef OPENSSL_NO_SSL_TRACE
  39. # define OPENSSL_NO_SSL_TRACE
  40. #endif
  41. #ifndef OPENSSL_NO_SSL2
  42. # define OPENSSL_NO_SSL2
  43. #endif
  44. #ifndef OPENSSL_NO_STORE
  45. # define OPENSSL_NO_STORE
  46. #endif
  47. #ifndef OPENSSL_NO_UNIT_TEST
  48. # define OPENSSL_NO_UNIT_TEST
  49. #endif
  50. #ifndef OPENSSL_NO_WEAK_SSL_CIPHERS
  51. # define OPENSSL_NO_WEAK_SSL_CIPHERS
  52. #endif
  53. #endif /* OPENSSL_DOING_MAKEDEPEND */
  54. #ifndef OPENSSL_THREADS
  55. # define OPENSSL_THREADS
  56. #endif
  57. #ifndef OPENSSL_NO_DYNAMIC_ENGINE
  58. # define OPENSSL_NO_DYNAMIC_ENGINE
  59. #endif
  60. /* The OPENSSL_NO_* macros are also defined as NO_* if the application
  61. asks for it. This is a transient feature that is provided for those
  62. who haven't had the time to do the appropriate changes in their
  63. applications. */
  64. #ifdef OPENSSL_ALGORITHM_DEFINES
  65. # if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
  66. # define NO_EC_NISTP_64_GCC_128
  67. # endif
  68. # if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
  69. # define NO_GMP
  70. # endif
  71. # if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
  72. # define NO_JPAKE
  73. # endif
  74. # if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
  75. # define NO_KRB5
  76. # endif
  77. # if defined(OPENSSL_NO_LIBUNBOUND) && !defined(NO_LIBUNBOUND)
  78. # define NO_LIBUNBOUND
  79. # endif
  80. # if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
  81. # define NO_MD2
  82. # endif
  83. # if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
  84. # define NO_RC5
  85. # endif
  86. # if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
  87. # define NO_RFC3779
  88. # endif
  89. # if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
  90. # define NO_SCTP
  91. # endif
  92. # if defined(OPENSSL_NO_SSL_TRACE) && !defined(NO_SSL_TRACE)
  93. # define NO_SSL_TRACE
  94. # endif
  95. # if defined(OPENSSL_NO_SSL2) && !defined(NO_SSL2)
  96. # define NO_SSL2
  97. # endif
  98. # if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
  99. # define NO_STORE
  100. # endif
  101. # if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST)
  102. # define NO_UNIT_TEST
  103. # endif
  104. # if defined(OPENSSL_NO_WEAK_SSL_CIPHERS) && !defined(NO_WEAK_SSL_CIPHERS)
  105. # define NO_WEAK_SSL_CIPHERS
  106. # endif
  107. #endif
  108. #define OPENSSL_CPUID_OBJ
  109. /* crypto/opensslconf.h.in */
  110. /* Generate 80386 code? */
  111. #undef I386_ONLY
  112. #if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
  113. #if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
  114. #define ENGINESDIR "/tmp/openssl-1.0.2l-x86_64/lib/engines"
  115. #define OPENSSLDIR "/tmp/openssl-1.0.2l-x86_64"
  116. #endif
  117. #endif
  118. #undef OPENSSL_UNISTD
  119. #define OPENSSL_UNISTD <unistd.h>
  120. #undef OPENSSL_EXPORT_VAR_AS_FUNCTION
  121. #if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
  122. #define IDEA_INT unsigned int
  123. #endif
  124. #if defined(HEADER_MD2_H) && !defined(MD2_INT)
  125. #define MD2_INT unsigned int
  126. #endif
  127. #if defined(HEADER_RC2_H) && !defined(RC2_INT)
  128. /* I need to put in a mod for the alpha - eay */
  129. #define RC2_INT unsigned int
  130. #endif
  131. #if defined(HEADER_RC4_H)
  132. #if !defined(RC4_INT)
  133. /* using int types make the structure larger but make the code faster
  134. * on most boxes I have tested - up to %20 faster. */
  135. /*
  136. * I don't know what does "most" mean, but declaring "int" is a must on:
  137. * - Intel P6 because partial register stalls are very expensive;
  138. * - elder Alpha because it lacks byte load/store instructions;
  139. */
  140. #define RC4_INT unsigned int
  141. #endif
  142. #if !defined(RC4_CHUNK)
  143. /*
  144. * This enables code handling data aligned at natural CPU word
  145. * boundary. See crypto/rc4/rc4_enc.c for further details.
  146. */
  147. #define RC4_CHUNK unsigned long
  148. #endif
  149. #endif
  150. #if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
  151. /* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
  152. * %20 speed up (longs are 8 bytes, int's are 4). */
  153. #ifndef DES_LONG
  154. #define DES_LONG unsigned int
  155. #endif
  156. #endif
  157. #if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
  158. #define CONFIG_HEADER_BN_H
  159. #undef BN_LLONG
  160. /* Should we define BN_DIV2W here? */
  161. /* Only one for the following should be defined */
  162. #define SIXTY_FOUR_BIT_LONG
  163. #undef SIXTY_FOUR_BIT
  164. #undef THIRTY_TWO_BIT
  165. #endif
  166. #if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
  167. #define CONFIG_HEADER_RC4_LOCL_H
  168. /* if this is defined data[i] is used instead of *data, this is a %20
  169. * speedup on x86 */
  170. #undef RC4_INDEX
  171. #endif
  172. #if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
  173. #define CONFIG_HEADER_BF_LOCL_H
  174. #undef BF_PTR
  175. #endif /* HEADER_BF_LOCL_H */
  176. #if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
  177. #define CONFIG_HEADER_DES_LOCL_H
  178. #ifndef DES_DEFAULT_OPTIONS
  179. /* the following is tweaked from a config script, that is why it is a
  180. * protected undef/define */
  181. #ifndef DES_PTR
  182. #undef DES_PTR
  183. #endif
  184. /* This helps C compiler generate the correct code for multiple functional
  185. * units. It reduces register dependancies at the expense of 2 more
  186. * registers */
  187. #ifndef DES_RISC1
  188. #undef DES_RISC1
  189. #endif
  190. #ifndef DES_RISC2
  191. #undef DES_RISC2
  192. #endif
  193. #if defined(DES_RISC1) && defined(DES_RISC2)
  194. #error YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
  195. #endif
  196. /* Unroll the inner loop, this sometimes helps, sometimes hinders.
  197. * Very mucy CPU dependant */
  198. #ifndef DES_UNROLL
  199. #define DES_UNROLL
  200. #endif
  201. /* These default values were supplied by
  202. * Peter Gutman <pgut001@cs.auckland.ac.nz>
  203. * They are only used if nothing else has been defined */
  204. #if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
  205. /* Special defines which change the way the code is built depending on the
  206. CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
  207. even newer MIPS CPU's, but at the moment one size fits all for
  208. optimization options. Older Sparc's work better with only UNROLL, but
  209. there's no way to tell at compile time what it is you're running on */
  210. #if defined( __sun ) || defined ( sun ) /* Newer Sparc's */
  211. # define DES_PTR
  212. # define DES_RISC1
  213. # define DES_UNROLL
  214. #elif defined( __ultrix ) /* Older MIPS */
  215. # define DES_PTR
  216. # define DES_RISC2
  217. # define DES_UNROLL
  218. #elif defined( __osf1__ ) /* Alpha */
  219. # define DES_PTR
  220. # define DES_RISC2
  221. #elif defined ( _AIX ) /* RS6000 */
  222. /* Unknown */
  223. #elif defined( __hpux ) /* HP-PA */
  224. /* Unknown */
  225. #elif defined( __aux ) /* 68K */
  226. /* Unknown */
  227. #elif defined( __dgux ) /* 88K (but P6 in latest boxes) */
  228. # define DES_UNROLL
  229. #elif defined( __sgi ) /* Newer MIPS */
  230. # define DES_PTR
  231. # define DES_RISC2
  232. # define DES_UNROLL
  233. #elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */
  234. # define DES_PTR
  235. # define DES_RISC1
  236. # define DES_UNROLL
  237. #endif /* Systems-specific speed defines */
  238. #endif
  239. #endif /* DES_DEFAULT_OPTIONS */
  240. #endif /* HEADER_DES_LOCL_H */
  241. #ifdef __cplusplus
  242. }
  243. #endif